Floor Polisher Machine – TopFloor EX30-OCS
The EX30-OCS is a oscillating floor polisher machine and orbital floor cleaner from our fleet which clients can hire or buy. It is a versatile rotary floor machine that is ideal for difficult to clean areas like steps on stairways and can also be used for sanding wooden floors and deep cleans on linoleum or other hard floors. This floor polisher can have weights added or taken off for different tasks and duties; please see a demonstration video introduction to the EX30 below:
The Topfloor EX30-OCS small floor buffer polisher machine is ideal for cleaning small or difficult-to-clean areas.
It is used by many professionals as an additional machine to the Topfloor EX55-OCS for edges and difficult corners.
The EX30-OCS floor cleaner/polisher is also the ideal machine for cleaning stairs. The machine is made of stainless steel and has been designed according to the principles of Excentr: robust and user-friendly.
|Uses:||Cleaning, deep cleaning, stripping, renovating, polishing, sanding and preparation work. The machine comes with: a 25m power cable, 2 sets of weights (4 weights in total) and a red pad.|
|Working Surface||30 x 20cm / 11.8 x 7.9″ inches|
|Weight||16 kg / 35.3 lb|
|Noise Level||60 dB|
|Cable Length||12m / 39ft|
|Distance – Motor to Floor||31 cm / 12.2″ inches|
|Distance – Handle to Floor||115 cm / 45.3″ inches|
|Distance – Machine Front to Back of Wheel||23 cm / 9″ inches|
FEATURES & BENEFITS
ORBITAL CLEANING: THE TECHNOLOGY OF THE FUTURE…
The Topfloor range of oscillating floor cleaning machines are renown for being high-end, innovative floor preparation machines, that offers products and concepts that operate according to the “oscillating method”. This method of operation has many benefits compared to the traditional machine cleaning methods. Discover the benefits:
The oscillating method takes the cleaning, stripping, polishing or renovation of floors to a whole new level. The level of effectiveness is unprecedented thanks to the 2,800 movements per minute and the maximum pad pressure of 140 kg.
The perfect balance makes working with the Topfloor oscillating machines simple and easy, as you can move the machines in your desired direction without encountering almost any resistance. The adjustable handle makes for a responsible posture, and helps prevent back ache and fatigue.
Fully blasted stainless steel, extra heavy eccentric, and extra heavy rubbers, are a few of the points of emphasis that we have consciously incorporated into our designs in order to get enduring machines.
With the oscillating cleaning method you can, often without adding any cleaning agents or chemicals, do any of the following:
– Strip & polish
– Renovate & prepare
– Remove paint, coatings, adhesive residue, etc.
BENEFITS OF THE ‘OSCILLATING CLEANING METHOD’:
– SIGNIFICANTLY BETTER RESULTS WITHIN SHORTER PERIOD OF TIME
– UNMATCHED MECHANICAL EFFECT
– MUCH HIGHER PRODUCTIVITY COMPARED TO TRADITIONAL PRINCIPLES
– EASY FOR ANYONE TO USE IN A SIMPLE AND VERY ERGONOMIC MANNER
– RECTANGULAR PADS WORK AGAINST THE SKIRTING BOARDS AS WELL THE CORNERS
– VERY VERSATILE IN TERMS OF APPLICATION
– ABSOLUTE PROBLEM SOLVER
– IN MANY CASES FREE OF CHEMICALS OR WITH A SMALL ADDITION OF WATER
– LESS WATER SPLASHING AROUND
– YOU YOURSELF DETERMINE THE WEIGHT AND THEREFORE THE PRESSURE ON THE PAD OR BRUSH
WATCH THE EX30-OCS OSCILLATING FLOOR SCRUBBER- IN-ACTION
CREATE CLEAN IN YOUR WORKPLACE TODAY!