The Topfloor EX43-OCS industrial oscillating floor cleaning machine combines an eccentric movement with a rotating movement, such as that made by a single-disc machine. This combination of movements, also called an orbital movement, is extremely effective at cleaning off hard-stained dirt on both hard and soft floors. The Topfloor EX43-OCS has a variable weight, just like the other Topfloor oscillating floor scrubbers. The pad pressure can be varied between 40kg &112kg by adding or removing weights.
Due to the combination of the two movements, there is an optimal mix between balance and extreme cleaning power. The Topfloor EX43-OCS is very easy and extremely ergonomic to use. Optionally, the machine can be equipped with a spray system. The water, either with or without an additive, is evenly distributed on to the surface in a controlled manner. This is ideal when working on a carpet! The Topfloor EX43-OCS can be used to clean, strip and polish many different types of floor.
The Topfloor EX43-OCS has a removable power cable to give you greater flexibility. If the power cable is damaged, you do not need an electrician to replace it.
The Topfloor EX43-OCS oscillating floor cleaning machine is used for cleaning root-deep into the piles of a well trodden carpet and extracting large volumes of dirt, in walkways where there a lot of human traffic, such as event conference centres.
Since the EX43-OCS heavy duty orbit floor cleaner does not only have an orbital rotation of 140 rpm, but also simultaneously makes 1,400 small eccentric rotations of ø 2.2 cm, the piles are shaken and the microfibre pad scrapes the carpet fibres clean in every direction. This method, therefore, guarantees a cleaner result and greater volume in the fibres, and a fresher, clean looking carpet, ready to be walked on again.
The rotational movement of traditional single-disc floor cleaning machines pushes all the fibres in one direction. As a result, the cleaning result is not optimal and the carpet becomes more compressed.
Since the Topfloor EX43-OCS makes so many movements in every direction, it is extremely suitable for treating wood. The sanding finish achieved with both coarse- and fine-grain (grit) sandpaper and open-structure grinding discs is very impressive. This machine will also amaze you when sanding between layers and when polishing after a belt sander has been used. The machine can also be used to finish a floor with oil or wax. It distributes the product very well and rubs it in perfectly.
Features and benefits
ORBITAL CLEANING: THE TECHNOLOGY OF THE FUTURE…
The Topfloor range of oscillating floor cleaning machines are renown for being high-end, innovative floor preparation machines, that offers products and concepts that operate according to the “oscillating method”. This method of operation has many benefits compared to the traditional machine cleaning methods. Discover the benefits:
The oscillating method takes the cleaning, stripping, polishing or renovation of floors to a whole new level. The level of effectiveness is unprecedented thanks to the 2,800 movements per minute and the maximum pad pressure of 140 kg.
The perfect balance makes working with the Topfloor oscillating machines simple and easy, as you can move the machines in your desired direction without encountering almost any resistance. The adjustable handle makes for a responsible posture, and helps prevent back ache and fatigue.
Fully blasted stainless steel, extra heavy eccentric, and extra heavy rubbers, are a few of the points of emphasis that we have consciously incorporated into our designs in order to get enduring machines.
With the oscillating cleaning method you can, often without adding any cleaning agents or chemicals, do any of the following:
– Strip & polish
– Renovate & prepare
– Remove paint, coatings, adhesive residue, etc.
Benefits of the ‘Oscillating Cleaning Method’:
– Significantly better results within shorter period of time
– Unmatched mechanical effect
– Much higher productivity compared to traditional principles
– Easy for anyone to use in a simple and very ergonomic manner
– Rectangular pads work against the skirting boards as well the corners
– Very versatile in terms of application
– Absolute problem solver
– In many cases free of chemicals or with a small addition of water
– Less water splashing around
– You yourself determine the weight and therefore the pressure on the pad or brush